Operating Systems 2017F Lecture 18

From Soma-notes
Jump to navigation Jump to search

Video

The video from the lecture given on Nov. 16, 2017 is now available.

Notes

In Class

Lecture 18: Filesystems and such
--------------------------------
* How can you recover a filesystem?
* How do you delete a file?

A filesystem is
 * persistent data structure
 * stored in fixed-sized blocks (at least 512 bytes in size)
 * maps hierarchical filenames to file contents
 * has metadata about files (somehow)

What's in a filesystem?
 * data blocks
 * metadata blocks

How do you organize metadata?

First job: identify basic characteristics of the filesystem

You need a "summary" block that tells you about everything else
 => this is the "superblock"

Normally the superblock is the first block of the filesystem

In the superblock
 - what kind of filesystem is this?
    - what filesystem magic number is there
 - how big is the filesystem?
 - how is it organized?
 - where can I find the rest of the metadata?

for POSIX filesystems
 - file metadata is stored in...inodes
 - most have pre-reserved inodes

So we have
 - superblock
 - inode blocks
 - data blocks
   - data blocks for directories
   - data blocks for files

How do you recover from damage?
 - filesystems never "reboot", must remain correct over
   the course of years
 - but errors will happen
   - bitrot
   - "accidental" corruption
   - computer failure/memory corruption/hard reboot

To make filesystems fast, data & metadata is cached in RAM
 - bad things happen if this data hasn't been written to disk and you reboot
 - even worse things happen if your RAM is bad and corrupts the data

Also bad...what if we lose the superblock?
 - you could lose EVERYTHING
 - so we have backup superblocks

Old scandisk/fsck was slow because they had to scan all filesystem metadata
 - not to recover data, but to fix metadata

Nowadays fsck is very fast and we rarely lose data due to losing power
 - we must be writing data to disk all the time
 - but isn't writing all the time slow?

On magnetic hard disks (not SSDs)
 - sequential operations are fast
 - random access is slow
   - we have to move the read/write head

So, on modern systems we update metadata (and sometimes data) by writing
sequentially to disk...and then later writing randomly
 - sequential writes go to the "journal"

On fsck on a journaled filesystem
 - just check the journal for pending operations (replay the journal)

There exist filesystems that are pure journal
 - log-based filesystem

logs and journal inherently create multiple copies of data and metadata that are hard to track.  This makes deletion nearly impossible (at least to guarantee)

Only way to guarantee...encrypt everything
 - if every file has its own key, you can delete the key and thus "delete" the data

Solid State Disks (SSD) use log-structured storage at a level below blocks.
 - writes are coarse-grained (you have to write a lot at once)
 - you don't want to write to the same cells too often, they'll die
   - have to do "wear-leveling"

Additional notes :

Lecture 18, november 17

Comp 3000: Midterm review: 2)mmap is called in dynamically linked libraries Work on 2404 assignment



8) yes , using mmap 9) shell did , because it has to open a new file 10) mmap allocates the entire file , 11) after the fork , the memory won’t be shared, no communication will happen. 12) no, race condition, busy wait , spin lock in the kernel. Some other user can modify the code which we are waiting. Before we decrement someone else will modify it. Someone can change with the semantics. How do you do kernel hacking? 1) Be humble, o you don’t necessary know everything, everyone is retarded in their own way 2) Verify you assumptions o By experiments o Compile and run 3) Check for errors! o Saves time o Kernel has to live “ cleanly” 4) Find another part of the kernel that is close to what you want to do o Use their ideas to apply yours by analyzing their code. o Follow their pattern “pattern match” to avoid problems since you may not understand all the abstractions and assumptions o Realize if their assumptions match yours 5) Understand the “flow of control” in the program o Architecture o Division of responsibilities o Division Why does this matter? o Possible to make a module and run in the background! Anything is possible! All you have to do is be creative. In fact you have to do a kernel thread  When does the Ethernet card receives data? o The Ethernet card sends an interrupt to the kernel o The CPU calls the kernel code for handling Ethernet data  When does the kernel run? o The kernel gets woken up for those events o The clock generates a timer interrupt  Interrupt requires a CPU score to be taken over o Core was probably running a user space process and this is scheduling is about  Schedule: what to do after having kicked a user space process off a core. o Can it be a complex CPU algorithm : no since it always sending interrupts? o Determines what is the next task to do?  Normally on a core: o A running userspace process o Interrupt happens o Core switches to supervisor mode, runs kernel code o Last part of the kernel code is the scheduler, chooses which userspace code to run o Goto top  Kernel is entered via interrupts, exited via scheduler  Entry and exit the kernel has to do low-level tasks o Uses assembly code  Limits because it is hard to manage On the website:  Arch : arch culture specific and the driver specific code,  Entry_64.5 : before the system call it calls this. Don’t mess up with it. It take cares of dispatching the system calls.  Shced.h: what the kernel uses to keep track of processes , go through it  :1 means bitfields in c  What criteria should the scheduler use? o “fairness” : everyone should get a turn, everyone gets to share the CPU. o Starvation : a term when a program does not get the CPU o Prevent starvation! o Equal share of resources. o Why would not you want your scheduler being fair? To avoid “foreground” tasks in the interactive systems. o Never enough biased towards “ foreground” tasks o Series of hacks and heuristics

 Memory is allocated lazily is the kernel : o which means it is possible to allocate way more memory that can be ever used. o This will cause “memory debt” o Out of memory killer : killing process when you exceed the amount of memory(ex: shoots whoever deposits the money)


Continuation of lecture 18:

Important notes: How can you recover a filesystem? How do you delete a file? What is a filesystem?:

  • persistent data structure
  • stored in fixed-sized blocks (at least 512 bytes in size)
  • maps hierarchical filenames to file contents
  • has metadata about files (somwhow)

What is in a filesystem?

  • data blocks
  • metadata blocks

How do you organize metdata: 1) First you must identify characteristics of the file system Superblock : summary y block which tells you about the other blocks you have and it depends on which file system you have. It’s usually the first block of a file system. In the superblock? : 1) What kind of file system is this? By checking what is the magic number it has 2) How big is the file system? 3) How is it organized? 4) Where can I find the rest of the metadata?

  • How can you identify which file system it is from looking at the super class

-> google “magic number of a file” -> ex: jpg ctr^c ctr^c : switched the pictures into a binary file -> look at the beginning of the file you will see JFIF: first several bytes in general that identifies the type of the file (magic number) File extension :  what is it ?  is it important  the kernel does not know and not care about it

For POSIX file systems: -.> file metadata is stored in inodes -.> most have pre-reserved inodes

  -> the only way you can run out of inodes if you keep creating small files 

Usenet : al the things you use to post messages thro social media, email, etc. Those were made using Usenet. Like email but Local Usenet server. But it died over time. Every message is stored in an individual file.



Important commands: File * : to identify the kind of file system 1. As : Run dumpe2fs foo. What does the output of this command mean?  Does this give you info about the file system?  File bar : bar is the file name and cp comp3000-midterm-2017.pdf bar  Evince bar : opens up the pdf file

Additional Notes

Lec 18

  • More on filesystems
  • How can you recover a fs and how do you delete a file?


A filesystem is a:

  • Persistent data structure
  • Stored in fixed size blocks (at least 512 bytes in size)
  • Maps hierarchical filenames to file contents
  • Has metadata about files somehow


What's in a filesystem

  • data blocks (stores file content)
  • metadata blocks, you need someway to find the blocks


How do you organize metadata?

First identify basic characteristics of the filesystem
- How big is the filesystem?
- What is the block size?

How do we differentiate between this and other filesystems?
You need a "superblock" which is a "summary" block that tells you about everything else

- Format depends on filesystem
- Normally the superblock is the first block of the filesystem

- Think of it almost like the root of a binary tree
In the superblock

  • Type of filesystem
    • What filesystem magic number is there (lets us identify one filesystem from another just by looking at the first block)
    • File command to know file type
  • Size of the filesystem
  • How the filesystem is organized (different filesystems organize their data differently)
  • Where can I find the rest of the metadata

He opened a .jpg as a binary file to show us the magic number in a file, first several bytes identify type of file.
- Kernel does not care about file extension but userspace programs may care about the extension.
- File extensions are only really useful for the people looking at them - Typical for binary file formats to have a set of bytes that identify the type of file
POSIX is a standard for maintaining compatibility between operating systems
- QNX, UNIX, MacOS are all POSIX compliant - Others comply on a varying scale For POSIX filesystems

  • File metadata is stored in INODES
  • When you create a filesystem, certain blocks are dedicated to being INODES

- Possible to have space in your filesystem without being able to store things if you run out of INODES

What is usenet? - A worldwide distributed discussion system (stone age version of reddit)
- Deprecated now because it could not handle the spam people uploaded into it, lol
- Format for usenet was every message stored in its own file => lots of small files
- Everyone has a local usenet server, access to read posts on the forum
- To post a message, send to local server which replicates it and sends it to all the other servers
So we have:

  • superblock
  • inode blocks
  • data blocks
    • data blocks for directories
    • data blocks for files


How do you recover from damage?

  • Filesystems never "reboot", must remain correct over time
  • Errors will happen: bitrot (when bits change), accidental corruption, computer failiure/memory corruption/hard reboot


To make filesystems fast, data and metadata are cached in RAM

  • Bad things happen if this data hasn't been writen to disk and you reboot
  • Even worse things happen if your RAM is bad and corrupts the data
  • FSCK is like scandisk in Windows 98 (this only happens when you do a hard reset)


What happens if you lose the superblock?

  • You could lose EVERYTHING
  • Node trunc dd command blew away first bytes of the file system so you could not mount it because you corrupted the superblock. However, fsck fixed this because we have backup superblocks :D

- Most filesystems keep copies of the superblock in random locations throughout which takes up some unusable amount of data
- But this is an impractical way to deal with data blocks

Old scandisk/fsck was slow because it had to scan all filesystem metadata, this is bad since we may lose power before it finished running

  • Not to recover data, but to fix metadata
  • lost+found directory might have some files that you can recover


What is lost+found?
- Part of the filesystem for fsck to use, dedicated directory
- Can find nodes that appear to be allocated but has no associated filename, no hardlinks, is inaccessible
- If you run fsck and it returns error messages you may be able to recover them by looking in lost+found
- Almost useless for modern filesystems

Nowadays fsck is very fast and we rarely lose data due to losing power

  • What this means is we must be writing to disk all the time
  • But isn't writing slow? => Not necessarily, all writes aren't the same


On Magnetic Hard Disks (not SSD's)

  • sequential oeprations are fast
  • random access is slow
    • we have to move the read/write head


So, on modern systems we update metadata (and sometimes data) by writing sequentially to disk...and then later writing randomly (which means were actually writing twice)

  • Sequential writes go to the journal


On fsck on a journaled filesystem

  • Just check the journal for pending operations (replaying the journal)
  • There exists filesystems for optimizing writes that are pure journal
  • Log based filesystem


How to delete things?

  • Compact it, we don't really know how many copies are stored in the filesystem


Logs and journal inherently create multiple copies of data and metadata that are hard to track. This makes deletion nearly impossible (at least to guarantee)

Only way to guarantee...encrypt everything

  • If every file has its own key, you can delete the key and this technically deletes the data
  • Only way to recover data is to break encryption scheme (this is nearly impossible)


SSDs use log-structured storage at a layer below the regular filesystem

  • Writes are coarse-grained (efficient for writing large amounts at once)
  • You don't want to write to the same cells too often, they will die
    • Instead spread out where you write data => "wear-leveling"


  • All modern Intel cpus have a management chip that manages power and such
    • Runs a small operating system called minux (this can also be compromised)