Operating Systems 2018F: Tutorial 7
This tutorial is not yet finalized.
Again in this tutorial you will be building and installing kernel modules. You will need root access to install kernel modules.
It is highly recommended that you use a comp3000 openstack instance for the exercises below for two reasons. First, you may have difficulties compiling kernel modules on other systems. Second, these operations are potentially dangerous and mistakes could destroy all data on the Linux system. Consider yourself warned!
In this tutorial you'll be playing with the remember kernel module. This module creates a device /dev/remember. You can write data to this device and when you read from it, it will return the data that you most recently wrote.
Getting started
First, make sure your system is ready to build things. On ubuntu:
sudo apt install build-essential libelf-dev sudo apt clean
Note that libelf-dev is a new addition. (To update your system, run "sudo apt update; sudo apt dist-upgrade")
Download and unzip remember.zip. From the command line:
wget https://homeostasis.scs.carleton.ca/~soma/os-2018f/code/tut7/remember.zip unzip remember.zip
Next, build the module and install it:
cd remember make sudo insmod remember.ko
And then test the module:
echo "Hello world" > /dev/remember cat /dev/remember
Be sure to check the kernel logs before and after. You may even want to follow the logs as you play with the module. To do this, run:
tail -f /var/log/kern.log
You'll want to do this in a separate window.
Tasks/Questions
- What can you do with the Makefile other than type "make"?
- How much data can you write to /dev/remember? What determines the limit? (Hint: try writing remember.c to /dev/remember)
- When is data being allocated? When is it deallocated?
- How could you increase the amount of data that /dev/remember stores? (Hint: what is saved_data_order for?)
- Does the kernel use virtual or physical addresses for its own data structures?
- What was changed from newgetpid.c that allows the /dev/remember device to be written to? What parts of the code had to be changed? What had to be added?
Code
remember.c
/*
remember.c
remember module COMP 3000, Carleton University
remembers what is written to it, returns in when read along with
info about how it is stored
License: GPLv2 or later
Author: Anil Somayaji
November 3, 2018
device driver and module code derived from:
https://appusajeev.wordpress.com/2011/06/18/writing-a-linux-character-device-driver/
and
http://pete.akeo.ie/2011/08/writing-linux-device-driver-for-kernels.html
*/
#include <linux/module.h>
#include <linux/string.h>
#include <linux/fs.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/uaccess.h>
#include <linux/mm.h>
#define DEVICE_NAME "remember"
#define CLASS_NAME "comp3000"
static struct class* remember_class = NULL;
static struct device* remember_device = NULL;
static int remember_major;
static struct page *saved_data_page = NULL;
static char *saved_data = NULL;
static unsigned long saved_data_len = 0;
static int saved_data_max = PAGE_SIZE;
static int saved_data_order = 0;
static int remember_open(struct inode *the_inode, struct file *f)
{
pr_info("Remember: device opened\n");
return 0;
}
static ssize_t remember_read(struct file *f, char *buf, size_t len, loff_t *offset)
{
unsigned long n;
char *error_msg = "Buffer too small.";
pr_info("Remember: read started\n");
if (*offset > 0) {
pr_info("Remember: read non-zero offset, aborting\n");
return 0;
}
if (len < saved_data_len) {
pr_info("Remember: read short buffer\n");
n = strlen(error_msg) + 1; // Include terminating null byte
if (n > len) {
n = len;
}
copy_to_user(buf, error_msg, n);
return n;
} else {
pr_info("Remember: read returning data, %ld bytes\n",
saved_data_len);
copy_to_user(buf, saved_data, saved_data_len);
*offset = saved_data_len;
return saved_data_len;
}
}
void init_saved_data(void)
{
pr_info("Remember: allocating data page");
if (saved_data) {
pr_err("Remember: saved_data already initialized!");
} else {
saved_data_page = alloc_pages(GFP_KERNEL,
saved_data_order);
saved_data = (char *) page_address(saved_data_page);
saved_data_len = 0;
pr_info("saved_data at kernel virtual address %lx",
(unsigned long) saved_data);
pr_info("saved_data_page page struct at address %lx",
(unsigned long) saved_data_page);
}
}
void free_saved_data(void)
{
if (saved_data_page) {
pr_info("Remember: freeing old data page");
__free_pages(saved_data_page, saved_data_order);
saved_data_page = NULL;
saved_data = NULL;
saved_data_len = 0;
}
}
static ssize_t remember_write(struct file *f, const char *buf, size_t len,
loff_t *offset)
{
unsigned long result;
if (*offset > 0) {
pr_info("Remember: write nonzero offset, aborting");
return 0;
}
free_saved_data();
init_saved_data();
if (len > saved_data_max) {
len = saved_data_max;
}
pr_info("Remember: write saving data, %ld bytes", len);
result = copy_from_user(saved_data, buf, len);
saved_data_len = len;
*offset = len;
return len;
}
static int remember_release(struct inode *the_inode, struct file *f)
{
pr_info("Remember: device closed\n");
return 0;
}
static struct file_operations remember_fops = {
.open = remember_open,
.read = remember_read,
.write = remember_write,
.release = remember_release,
};
static char *remember_devnode(struct device *dev, umode_t *mode)
{
if (mode)
*mode = 0666;
return NULL;
}
static int __init remember_init(void)
{
int retval;
remember_major = register_chrdev(0, DEVICE_NAME, &remember_fops);
if (remember_major < 0) {
pr_err("failed to register device: error %d\n", remember_major);
retval = remember_major;
goto failed_chrdevreg;
}
remember_class = class_create(THIS_MODULE, CLASS_NAME);
if (IS_ERR(remember_class)) {
pr_err("Remember: failed to register device class '%s'\n",
CLASS_NAME);
retval = PTR_ERR(remember_class);
goto failed_classreg;
}
remember_class->devnode = remember_devnode;
remember_device = device_create(remember_class, NULL,
MKDEV(remember_major, 0),
NULL, DEVICE_NAME);
if (IS_ERR(remember_device)) {
pr_err("Remember: failed to create device '%s'\n", DEVICE_NAME);
retval = PTR_ERR(remember_device);
goto failed_devreg;
}
pr_info("Remember: device registered using major %d.\n",
remember_major);
return 0;
failed_devreg:
class_unregister(remember_class);
class_destroy(remember_class);
failed_classreg:
unregister_chrdev(remember_major, DEVICE_NAME);
failed_chrdevreg:
return -1;
}
static void __exit remember_exit(void)
{
free_saved_data();
device_destroy(remember_class, MKDEV(remember_major, 0));
class_unregister(remember_class);
class_destroy(remember_class);
unregister_chrdev(remember_major, "remember");
pr_info("Unloading Remember module.\n");
return;
}
module_init(remember_init);
module_exit(remember_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Anil Somayaji <soma@scs.carleton.ca>");
MODULE_DESCRIPTION("A remember character device module");
Makefile
MODNAME := remember
obj-m := $(MODNAME).o
KDIR := /lib/modules/$(shell uname -r)/build
PWD := $(shell pwd)
default:
$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
clean:
/bin/rm -f *.o *.ko *~
/bin/rm -f Module.symvers modules.order Modules.symvers *.mod.c
/bin/rm -f .*o.cmd .cache.mk
/bin/rm -rf .tmp_versions
zip:
rm -f $(MODNAME).zip
mkdir $(MODNAME)
cp -a Makefile $(MODNAME).c $(MODNAME)
zip -r $(MODNAME).zip $(MODNAME)
rm -rf $(MODNAME)