COMP 3000 Essay 2 2010 Question 5: Difference between revisions

From Soma-notes
Myagi (talk | contribs)
No edit summary
Myagi (talk | contribs)
Line 9: Line 9:


==Background Concepts==
==Background Concepts==
A race condition is a system flaw that “occurs when two threads access a shared variable at the same time." Race conditions can be very complex, time consuming and expensive to fix. Unfortunately, the most challenging part of race condition is not fixing it, but rather find it. Race conditions are notorious for being extremely difficult to find, isolate and recreate. To help ease this process, the authors of this paper, Jingyue Wu, Heming Cui, Junfeng Yang, propose the adoption of LOOM.
LOOM is a system which dynamically locates and corrects areas which may be susceptible to race condition errors. The power of LOOM rests in its ability to operate on live applications in real time. This is possible thanks to its evacuation algorithm which injects execution filters to fix race conditions at runtime. Execution filters, otherwise known as request filtering, allow you to inspect the request before and after the main logic is executed. By leveraging execution filters as the means for correcting race conditions, LOOM is able to operate with very little performance overhead and is a highly scalable as the number of application threads increases.
The authors tested LOOM on existing real world race conditions found in common applications. The tests found that all tested race conditions were solved, with little performance overhead, in a scalable and easy to implement manor.
This paper consists of multiple terms which must be familiar to the reader in order to assist in reading the Bypassing Races in Live Applications with Execution Filters paper. These terms are listed and explained below:
This paper consists of multiple terms which must be familiar to the reader in order to assist in reading the Bypassing Races in Live Applications with Execution Filters paper. These terms are listed and explained below:



Revision as of 22:39, 24 November 2010

Paper

Title: Bypassing Races in Live Applications with Execution Filters

Authors: Jingyue Wu, Heming Cui, Junfeng Yang

Affiliations: Computer Science Department, Columbia University

Supplementary Information: Video available here as well as slides

Background Concepts

A race condition is a system flaw that “occurs when two threads access a shared variable at the same time." Race conditions can be very complex, time consuming and expensive to fix. Unfortunately, the most challenging part of race condition is not fixing it, but rather find it. Race conditions are notorious for being extremely difficult to find, isolate and recreate. To help ease this process, the authors of this paper, Jingyue Wu, Heming Cui, Junfeng Yang, propose the adoption of LOOM.

LOOM is a system which dynamically locates and corrects areas which may be susceptible to race condition errors. The power of LOOM rests in its ability to operate on live applications in real time. This is possible thanks to its evacuation algorithm which injects execution filters to fix race conditions at runtime. Execution filters, otherwise known as request filtering, allow you to inspect the request before and after the main logic is executed. By leveraging execution filters as the means for correcting race conditions, LOOM is able to operate with very little performance overhead and is a highly scalable as the number of application threads increases.

The authors tested LOOM on existing real world race conditions found in common applications. The tests found that all tested race conditions were solved, with little performance overhead, in a scalable and easy to implement manor.

This paper consists of multiple terms which must be familiar to the reader in order to assist in reading the Bypassing Races in Live Applications with Execution Filters paper. These terms are listed and explained below:

Deadlock: Deadlocks usually occur within the context of two threads. One thread tries to lock a variable that the other thread has already locked and vice versa. The result of this is that each thread is waiting for each others thread to release the variable. Thus a deadlock occurs and nothing can happen.

Execution Filters: Otherwise known as request filtering. Request filters allow you to inspect the request before and after the main logic is executed. These are mutual exclusion filters in the context of this paper.

Hot Patches: "Hot patching provides a mechanism to update system files without rebooting or stopping services and processes." [1]

Hybrid Instrumentation Engine: "Instrumentation refers to an ability to monitor or measure the level of a product's performance, to diagnose errors and writing trace information." [2] Instrument programs can have low runtime overhead, but instrumentation has to be done at compile time. Dynamic instrumentation can update programs at runtime but incur high overhead. A hybrid instrumentation is an implementation of combined static and dynamic instrumentation.

Lock: A lock is a way of limiting access to a common resource when using multiple threads. Lock and unlock methods are usually called at the beginning and end of a target method, respectively. "Mutual exclusion locks (mutexes) are a common method of serializing thread execution. Mutual exclusion locks synchronize threads, usually by ensuring that only one thread at a time executes a critical section of code. Mutex locks can also preserve single-threaded code." [3]

Mutex: Unable to be both true at the same time.

Race Condition: "A race condition occurs when two threads access a shared variable at the same time." [4]

Semaphore: Semaphores are basically a special type of flag and generalize a down and up state(sleep or wakeup). The down operation checks to see if the value is greater than 0 and if so, decrements the value and uses up one stored wakeup. If the value is 0, the process is put to sleep. These steps are all done in a single indivisible atomic action. It is guaranteed that once a semaphore operation has started, no other process can access the semaphore until the operation has been completed or blocked. Semaphores are an essential part of solving synchronization problems. [5]

Research problem

Problem being addressed

With the rise of multiple core systems, multithreaded programs are often prone to race conditions. Races are hard to detect, test and debug. Due to the immaturity of current race detectors, this paper explains a new approach to race detection and work arounds through the use of LOOM.

Related work

Two common solutions to fixing deployed races are software updates and hot patches. Software updates require restarts whereas hot patches applies patches to live systems. However, relying on conventional patches can lead to new errors and could be unsafe, due to a multithreaded applications complexity. Releasing a reliable patch takes time, but developers often resort to more efficient fixes rather than placing proper locks in the application due to performance or work pressure.

Contribution

Current solution expressed

Compared to traditional solutions, LOOM differs in its approach to race fixes. It is designed to quickly develop safe, optimized, temporary workarounds while a concrete solution is developed. LOOM is also very easy to use. LOOM is compiled with a developers application as a plugin and kept separate from the source code. The plugin will inject the LOOM update into the application binary.

Mutual exclusion filters are written by the developer and synced with the source code to filter out any racy threads. The code declaration used is easy to understand and can be inserted in a code region that need to be mutually exclusive. The developer does not need to deal with low level operations such as lock, unlock and semaphore operations. Users can then download the filter and apply it to the application while it is still live.

LOOM is flexible in that developers can make trade-offs in performance and reliability in their application in conjunction with LOOM. These can include making two code regions mutually exclusive even when accessing different objects or with extreme measures, making them run in single threaded mode.

An evacuation algorithm is used for safety as to not introduce new errors. A critical region is marked using static analysis. All threads in the critical region are then evacuated. After the evacuation is executed, the execution filter is installed and then the threads are resumed after a live update pause is done at a safe location.

LOOM's hybrid instrumentation engine is used to reduce its overhead. The engine statically changes an applications binary to anticipate dynamic updates.

Evaluation of LOOM was based on overhead, scalability, reliability, availability and timeliness. These were demonstrated using Apache and MySQL in conjunction with the multithreaded ApacheBench and SysBench, respectively.

Critique

Good

The authors of this essay are efficient at delivering the information surrounding their thesis both in staying focused on the main thesis as well as backing up their topics with relevant examples and data. This helps to keep the thesis paramount throughout the paper. Examples throughout the paper, particularly the MySQL example ensure that the use of execution filters is clear to the reader. All of the examples are well documented and some (ex. Figure 2) are simplified as to not confuse the reader with too much unnecessary information. References throughout the writing backup the reliability of the paper and let the user keep track of the sources to properly check information and sources.

The whole essay flows well and the information is delivered in a well put together order, allowing the reader to learn enough about LOOM (or any of the sub-topics involved in the explanation) before being informed about the next relative subject. The paper ends with a conclusion that does a good job of wrapping up the whole paper in a clear and concise manner.

Not-So-Good

One of the problems with this paper is that although many of the examples are simplified in order to expedite the understanding of the user, some are a little oversimplified. For example, Figure 9 is a graphic that attempts to represent the evacuation process in a visual manner. Unfortunately, this ends up making the problem seem almost trivial and does little more than water down the information.

The writers are also a little bit one sided (with understandable reason) on the topic. Although they do admit the limitations of LOOM, they do not spend much time discussing any problems later. There is a large amount of play-up for LOOM without much discussion of the possible problems with it, such as the clients running LOOM may decide not to fix the race conditions and rather just let the program continue to run with LOOM as a permanent fix. This may cause further errors in the long term life of the program.

References

[1] Introduction to Hotpatching. http://technet.microsoft.com/en-us/library/cc781109(WS.10).aspx.

[2] Introduction to Instrumentation and Tracing. http://msdn.microsoft.com/en-us/library/aa983649(VS.71).aspx

[3] A. D. Marshall. Further Threads Programming:Synchronization. Cardiff University, 1999 HTML

[4] Description of race conditions and deadlocks. http://support.microsoft.com/kb/317723

[5] A. S. Tanenbaum. Modern Operating Systems (3rd Edition), page 128, 2008